Boride
Products WIN® System (Water Induction Nozzle System)
has been developed and patented as a simple solution for high
production, wet abrasive blasting which can be used with your
existing pressure blast equipment. The system can be used with water
from a tap or with rust inhibitors introduced through any simple
pump. No special equipment is required. You will get the highest
performance possible in wet abrasive sandblasting technology.
 |
|
 |
Features/Benefits:
- Simple, low-cost information.
- No special equipment required.
- Low pressure water source.
|
- Minimal water consumption: 3/4 to 6 quarts per minute
dependent on level of dust suppression desired.
- Utilizes a standard 1 1/4" nozzle coupling and 1" I.D.
blast hose or 50mm 2 1/4" UNC thread now available.
- Dual operation as a dry or wet blast nozzle.
- The WIN® System performs as well as
any wet blast system at a fraction of the cost.
|
| Style 1 1/4
NPS |
Style 50
mm |
Bore
Size |
Air
Consumption |
Length |
Weight |
| WIN-3 |
WIN-350 |
3/16" |
45 CFM |
5" |
1 lb. 4 oz. |
| WIN-4 |
WIN-450 |
1/4" |
80 CFM |
5 3/4" |
1 lb. 8 oz. |
| WIN-5 |
WIN-550 |
5/16" |
140 CFM |
6 1/4" |
1 lb. 12 oz. |
| WIN-6 |
WIN-650 |
3/8" |
200 CFM |
6 3/4" |
2 lb. 4 oz. |
| WIN-7 |
WIN-750 |
7/16" |
255 CFM |
8 1/4" |
2 lb. 14 oz. |
| WIN-8 |
WIN-850 |
1/2" |
340 CFM |
9" |
3 lb. 6
oz. | |
